Paxton PROXIMITY P series Mifare reader - Manual (Page 2)

-35 °C +66 °C
10V DC 14V DC
170 mA
125 kHz
13.56 MHz
570 µs 700 µs
50 mm 100 mm 15 mm
EM4100 keyfob 50 mm
EM4100 card 60 mm
EM4100 proxdisc 30 mm
Hitag1 ISO 60 mm
Token type and read range
Mifare 1K 50 mm
Mifare 4K 40 mm
Mifare Ultralight / C 25 mm
Mifare Desfire 20 mm
Net2 keyfob 30 mm
Net2 token 80 mm
Net2 watchprox 20 mm
Hitag2 ISO 70 mm
850 mm
Wiring
Voltage
Clock and data bit period
Carrier frequency
Specifications
Operating temperatures - all items
Electrical
Environment
Dimensions
Min Max
Width Height Depth
Current
Cable length
Waterproof
Min Max
The declaration of conformity is available on request. Contact details are provided at:
http://paxton.info/596
This product is not suitable for retail sale. All warranties are invalid if this product is not installed by a competent person.
Connection to a control
unit reader port
Yes - Rated IPX7
5 metres
The reader port module is designed to convert the
standard reader ports on Switch2 and Net2 controllers
to accept one or two RJ45 connections. Pull off the
screw terminal block from the reader port and simply
replace it with this module.
This module can be used to provide a
connection point for the reader RJ45 plug.
The terminals on the module are then wired
colour for colour to the controller.
Alternatively, the reader can be wired directly
into the screw terminals of the control unit by
first cutting off the RJ45 plug and stripping
back the wires in the cable.
Reader port module (325-030)
This module may be purchased separately to speed
up the installation and replacement of readers.
Connection modules
Further information on how to purchase Installer Tools is available at: http://paxton.info/841
Reader junction box (325-020)
Hands Free Token