Paxton – Paxton PROXIMITY backbox reader User Manual
Page 3
Technical Support
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
01273 811011
Fitting
Ins-30153 PROXIMITY backbox reader
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
Paxton
The back plate has been designed to fit the majority of UK, European and US backboxes.
The reader will operate with a wide range of tokens including Paxton, Hitag1, Hitag2, EM4100 and Mifare.
Preparation - Install a standard electrical backbox at the required position. Run the data cable from the control unit
location and tie off inside the backbox.
Installation - Attach the back plate to the backbox with the screws provided. Wire in the cable to the connector and
clip the reader to the back plate. The reader can now be fully tested and the Net2 system commissioned.
Final fix - Once the building work, local decorating, etc. has been completed, you can add the reader cover and
secure the assembly with the screw provided and peel off the protective film.
1
2
3
- Net2 PaxLock (7 pages)
- Net2 PaxLock Demo Case (2 pages)
- Net2 Entry - Control unit (4 pages)
- Net2 Entry - Panel (7 pages)
- Net2 Entry - Monitor (9 pages)
- Net2 Entry - Extension switch (4 pages)
- Net2 Entry (4 pages)
- Net2 Entry – VR panel (7 pages)
- Net2 PaxLock - Scandic (7 pages)
- PROXIMITY Mullion HID reader (4 pages)
- PROXIMITY panel mount HID reader (4 pages)
- PROXIMITY metal HID reader (4 pages)
- PROXIMITY panel mount reader EM4100 Wiegand output (4 pages)
- PROXIMITY metal reader EM4100 Wiegand output (4 pages)
- PROXIMITY energy saving reader demonstration kit (4 pages)
- Hands free demonstration unit (5 pages)
- PROXIMITY Mullion reader (3 pages)
- Net2 Caller ID reader (4 pages)
- OEM PROXIMITY Mifare reader 34bit Wiegand (4 pages)
- PROXIMITY backbox reader (3 pages)
- 24V AC/DC power supply with Net2 ACU (3 pages)
- 12V DC PoE+ power supply in cabinet with Net2 plus (3 pages)
- PROXIMITY P series Wiegand output - Biomet (4 pages)
- 24V AC/DC power supply with battery charger (3 pages)
- OEM Magstripe Clock and Data reader with Buzzer option (2 pages)
- SONY number plate reader (11 pages)
- Easyprox nano (8 pages)
- Net2 Evaluation Kit (5 pages)
- Vandal resistant compact metal keypad (4 pages)
- OEM Vandal resistant metal keypad (2 pages)
- Net2 nano starter kit (2 pages)
- PROXIMITY P series Mifare reader (4 pages)
- LCD reader image uploader, USB (2 pages)
- Easyprox nano starter kit (12 pages)
- Net2 desktop reader USB - MultiFormat (2 pages)
- PROXIMITY energy saving reader (3 pages)
- LCD PROXIMITY reader kit (10 pages)
- OEM marine reader (2 pages)
- PROXIMITY LCD reader demonstration unit (10 pages)
- Magstripe 25 shadow card pack (2 pages)
- Easyprox compact keypad (9 pages)
- Hands free keyfob for Net2 (2 pages)
- 2A/12V DC boxed power supply (3 pages)
- Hands free read range tester (1 page)