Paxton Net2 Entry – VR panel - Manual (Page 5)

Page 5
3. Call timeout from the Engineer menu - Press key 3
1. Door open time
from the Engineer menu - Press key 1.
1. Set voice volume
2. Volume settings
2. Set keypress tone
This is the time period that the lock will stay
released once the open door button has been
pressed on a monitor. This value may only be
changed when not administered by Net2.
This is the maximum time period that one call
can last. This ensures that the entry panel is not
held busy if a call is not terminated correctly.
This sets the volume of the entry panel speaker.
Use the up and down arrow buttons to adjust then press Bell.
This sets the tone that the entry panel will make when a key is pressed.
Press 1. Click
Press 2. Beep
Press 3. Silent
3. Set door open tone
This sets the tone that the entry panel will make while the lock is released.
Press 1. Beep
Press 2. Buzz
Press 3. Silent
from Volume settings menu - Press key 1
from the Engineer menu - Press key 2
from Volume settings menu - Press key 3
from Volume settings menu - Press key 4
1. Allow video without being called
4. View options
from View options menu - Press key 1
from the Engineer menu - Press key 4
Press 1. Yes
Press 2. No
This allows the camera to be viewed at any time even when not being used to grant access.
2. Allow audio without being called
Press 1. Yes
Press 2. No
This allows the microphone to be turned on at any time even when not being used to grant access.
3. Open the Door without being called
Press 1. Yes
Press 2. No
This allows the 'Unlock door' button to be used while viewing with the camera. The visitor does not need to initiate the call.
from View options menu - Press key 2
from View options menu - Press key 3
X
Use the key to Cancel Use the up and down arrows on the panel to view all the menu options.
2. Set ring volume from volume settings menu - Press key 2
This sets the volume of the ring tone when making a call.
Use the up and down arrow buttons to adjust then press Bell.