Pavement Ends 41825 Cargo Cover - Manual (Page 5)

41825 pg 5 Rev. A 0303
Cargo Cover
Pull Flap out and Over
Cargo Cover
Cab Curtain -
From Rear
Step Three - Optional
Pull up on the front, edge of the Cargo Cover and mark
the locations matching the three snaps on the Cab Curtain
flap, on the fabric along the top of the Cargo Cover.
Snaps - on underside of
flap
Install Studs on Webbing
Reinforced Front Edge
Step Four - Optional
At the marked locations, push the sharp end of a Snap Head
Screw through the Cargo Cover from the vinyl side so that
the snap is on top of the vinyl. Thread an Acorn Locknut
over the pointed end of the Snap Head Screw. Snap the
Cargo Cover and the Cab Curtain together with the three
snaps.
Fabric -
Vinyl Up
Acorn Locknut
Snap Head Screw
If You Have a New Cab Curtain on Your Vehicle
Step Two
Locate the flap sewn to the rear of the Cab Curtain.
Pull the flap out over the top of the front edge of the
Cargo Cover.
Step One
Locate Attaching Snaps from Hardware Kit supplied
with the Cab Curtain.
Fabric - Backing Up
Fabric Reinforcement Push Snap Head Screw
through to form a hole