Pavement Ends 41825 Cargo Cover - Manual (Page 4)

41825 pg 4 Rev. A 0303
Step Six
Roll the plastic strips, sewn into the rear corners of the Cargo Cover into the
Corner Retainers. Smooth the hemmed corner area of the Cargo Cover over
retainer by sliding the strips towards the front and rear. Make sure the plastic
strip fits up into the retainer so that the collar fits properly.
Roll Plastic Strips into
Rear Corner Retainer Plastic
Strip
Hook and Loop
Strips
Pull gently down, then out to
release plastic strip
Step Seven
Tuck the seat belt assemblies into the rear sport bar
collars and close the rear sport bar collars by pulling
firmly on the fabric and fastening the Hook and Loop
Strips to each other.
Tighten the straps on the front of the Cargo Cover.
To Remove Cargo Cover
When removing the Cargo Cover, use the loops sewn
to the fabric to release the plastic strips. Pull gently
down, then straight out to release the plastic strip
from the retainers.
Fabric
Plastic Strip
Rear Corner
Retainer
Detail of
Plastic Strip
Collar
Hemmed
Corner