Multiquip DCA60SSAI - Manual (Page 50)

PAGE 50 — DCA-60SSAI — PARTS AND OPERATION MANUAL— FINAL COPY (09/15/01)
1. To stop the engine in the event of an emergency, switch
the MAIN, GFCI and LOAD circuit breakers to ‘OFF’
position.
2. Turn the key switch to ‘STOP’.
EMERGENCY STOP ENGINE SHUTDOWN
To shutdown the generator, use the following procedure:
1. Switch both the MAIN, GFCI and LOAD circuit breakers
(Figure 55)to the “OFF” position.
2. Turn to the right and press in the engine throttle lever
(Figure 56).
3. Let the engine cool by running it for 3-5 minutes with no
load applied.
4. Turn the key switch to ‘STOP’’ (Figure 57).
5. Remove the load from the UVW terminal strip.
Figure 55. Main, GFCI and Load
circuit breakers
Figure 56. Engine Throttle Lever
DCA-60SSAI — GENERATOR SHUT-DOWN PROCEDURE
Figure 57. Key Switch (OFF)