Generator start-up procedure (manual) – Multiquip DCA70SSIU User Manual

Page 36

PAGE 36 — DCA70SSIU 50 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #1 (01/06/09)

Place the

13.

main, GFCI, and aux. circuit breakers in the

ON position (Figure 49).

Main, Aux. and GFCI

Figure 49.

Circuit Breakers (ON)

Observe the generator’s ammeter (Figure 50) and

14.

verify it reads the anticipated amount of current with
respect to the load. The ammeter will only display a
current reading if a load is in use.

Ammeter (Load)

Figure 50.

The generator will run until manually stopped or an

15.

abnormal condition occurs.

GENERATOR START-UP PROCEDURE (MANUAL)