Multiquip SP2S13H20A - Manual (Page 36)

PAGE 36 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
MAINTENANCE
Battery Maintenance
Mishandling of the battery shortens the service life of the battery
and adds to maintenance cost. When handling the battery do the
following:
 Be careful not to let the battery electrolyte come in contact
with your body or clothing.
 Always wear eye protection and rubber gloves , since
the battery contains sulfuric acid which burns skin and eats
through clothing.
 Always check the battery terminals periodically to
ensure that they are in good condition.
 Use wire brush or sand paper to clean the battery
terminals.
 Always check battery for cracks or any other damage.
If white pattern appears inside the battery or paste
has accumulated at the bottom, replace the battery.
 If the pump will not be in operation for a long period
of time, store in cool dry place and check the battery
charge level every month to maintain the performance
of the battery.
 Check the battery regularly and make sure that each
electrolyte level is to the bottom of the vent well
(Figure 43). If necessary add only distilled water in a
well-ventilated area.
Figure 43. Battery Electrolyte Levels
Wear safety glasses or face mask , protective
clothes, and rubber gloves when working with
battery.
WARNING WARNING WARNING WARNING WARNING