Multiquip HDA-SERIES - Manual (Page 29)

HDA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #9 (07/02/10) — PAGE 29
Trowel Arm Adjustment Tool
If blades show uneven wear patterns or some tend to wear out
faster than others, the trowel arms may need to be adjusted.
Whiteman makes a special tool (Figure 36) that will adjust all of
the trowel arms consistently. The Trowel Arm Fixture P/N is 1817.
Figure 36. Trowel Arm Adjustment Fixture
OPTIONS
Lifting Bail
There is a heavy duty, center balance type lifting bail (Figure 35)
made specifically for your trowel. These bales are ideal for lifting
and transporting your trowel. They are designed to lift the finisher
and balance it on it’s center of gravity, providing great stability
while lifting. This option is not available on electric trowel models.
Figure 35. Lifting Bail
A. P/N 10157 (11 HP Engine)
B. P/N 11554 (13 HP Engine)
A B