C-4 finisher trowel — options – Multiquip C42H User Manual
Page 25

C-4 FINISHER WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #1 (07/24/02) — PAGE 25
Blades
Blades are a vital part of finishing concrete. This Whiteman
finisher has been designed to finish concrete and is built to
stringent quality standards out of the finest trowel steel. If you need
replacement blades, consult your parts list in this manual for part
numbers and order them from your Multiquip parts dealer or
importer.
Combo Blades
This trowel was equipped with
combination type (Figure 21)
blades as original equipment. These blades have been designed
for optimum performance in both the floating and finishing of
concrete. These blades are versatile and should take care of most
troweling needs.
Blades should be changed when
they fail to finish concrete in a
satisfactory manner.
C-4 FINISHER TROWEL — OPTIONS
Float Discs (Optional)
These round discs (Figure 22) attach to the spiders and allow the
machine to “
float ” on “wet ” concrete. The disc design allows early
floating and easy movement from wet to dry areas. They are also
very effective in embedding large aggregates and surface
hardeners.
Figure 22. Float Disk
Figure 21. Combination Blade
NOTE