beautypg.com

Caution, C-4 finisher trowel — rules for safe operation – Multiquip C42H User Manual

Page 10

background image

PAGE 10 — C-4 FINISHER WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #0 (07/24/02)

CAUTION:

Failure to follow instructions in this manual may

lead to serious injury or even death! This
equipment is to be operated by trained and

qualified personnel only! This equipment is
for industrial use only.

The following safety guidelines should always be used when
operating the

C-4 FINISHER

walk-behind power trowel.

SAFETY
DO NOT operate or service this equipment

before reading this entire manual.

■ This equipment should not be operated by

persons under 18 years of age.

NEVER operate the trowel without proper protective clothing,

shatterproof glasses, steel-toed boots and other protective
devices required by the job.

NEVER operate this equipment when not

feeling well due to fatigue, illness or taking
medicine.

NEVER operate the trowel under the

influence or drugs or alcohol.

ALWAYS check the trowel for loosened threads or bolts before

starting.

ALWAYS wear proper

respiratory

(mask),

hearing

and

eye

protection equipment when operating the trowel.

ALWAYS use extreme caution when

working with flammable liquids. When
refueling, stop the engine and allow it
to cool.

NEVER

smoke

around or near the machine.

Fire or explosion could result from

fuel

vapors

, or if fuel is spilled on a

hot!

engine.

NEVER operate the trowel in an explosive atmosphere or

near combustible materials. An explosion or fire could result
causing severe

bodily harm or even death.

■ Topping-off to filler port is dangerous, as it tends to spill fuel.
NEVER use accessories or attachments, which are not

recommended by Multiquip for this equipment. Damage to
the equipment and/or injury to user may result.

■ Whenever necessary, replace nameplate, operation and

safety decals when they become difficult read.

NEVER touch the hot exhaust

manifold, muffler or cylinder. Allow
these parts to cool before servicing
the trowel.

■ The engine of this trowel requires an adequate free flow of

cooling air. NEVER operate the trowel in any enclosed or

narrow area where free flow
of the air is restricted. If the
air flow is restricted it will

cause serious damage to
the trowel's engine and
may cause injury to people.

Remember the trowel's
engine gives off

DEADLY

carbon monoxide gas.

High Temperatures – Allow the engine to cool before adding

fuel or performing service and maintenance functions. Contact
with

hot!

components can cause serious burns.

ALWAYS refuel in a well-ventilated area, away from sparks

and open flames.

C-4 FINISHER TROWEL — RULES FOR SAFE OPERATION

■ Manufacture does not assume responsibility for any accident

due to equipment modifications.