Multiquip EHTX44Y5 - Manual (Page 6)

page 6 — eHTx44y RIDe-ON TROWeL • OpeRaTION maNuaL — Rev. #0 (01/16/13)
traininG cHecKliSt
TRaININg CHeCKLIST
This checklist will list some of the minimum requirements for machine maintenance and operation. Please feel free to
detach it and make copies. Use this checklist whenever a new operator is to be trained or it can be used as a review for
more experienced operators.
Training Checklist
No. Description OK? Date
1
Read operation manual
completely
2
Machine layout, location of
components, checking of engine
and hydraulic oil levels
3 Fuel system, refueling procedure
4 Operation of spray and lights
5
Operation of controls (machine
not running)
6
Safety controls, safety stop switch
operation
7 Emergency stop procedures
8
Startup of machine, pre-heat,
engine choke
9 Maintaining a hover
10 Maneuvering
11 Pitching
12 Matching blade pitch. Twin-Pitch™
13 Concrete fi nishing techniques
14 Shutdown of machine
15 Lifting of machine (lift loops)
16 Machine transport and storage