Multiquip EHTX44Y5 - Manual (Page 25)

eHTx44y5 RIDe-ON TROWeL • OpeRaTION maNuaL — Rev. #0 (01/16/13) — page 25
OperatiOn
engine Shut-Down
1. Return the engine speed control lever, (Figure 18) to
low idle, and allow the engine to idle for a minimum
5 minutes.
Figure 18. Engine Speed Control Lever
Idle (Low Speed)
2. Turn the ignition key counter-clockwise to the " starter
switch contact " position, then remove the key.
3. Clean and remove any foreign debris from the trowe
NOTICE
Important! To get the blades absolutely flat for using
float pans follow these steps:
1. Press right Twin Pitch™ rocker switch all the way
down.
2. Press left pitch rocker switch upward a little.
3. Press right Twin Pitch™ rocker switch all the way
down again.
4. Press left pitch rocker switch all the way down.
LO
W
HIG
H
ENGINE SPEED
CONTROL LEVER
NOTICE
Failure to allow the engine to idle for a minimum of
5 minutes before shutting engine OFF may lead to
turbocharger damage.