Multiquip EHTX44Y5 - Manual (Page 14)

page 14 — eHTx44y RIDe-ON TROWeL • OpeRaTION maNuaL — Rev. #0 (01/16/13)
DiMenSiOnS/SpecificatiOnS
A-LENGTH
B-WIDTH
C-HEIGHT
EHTX
Figure 1. EHTX44Y5 Dimensions
Table 1. eHTx44y5 Specifications
A–Length – in. (cm) 96.75 (246)
B–Width – in. (cm) 50.0 (127)
C–Height – in. (cm) 57.0 (145)
Weight – lbs. (kgs.) Operating 1,946 (882.7)
Weight – lbs. (kgs.) Shipping (Less Pallet Material) 1926 (873.6)
Blade Tip Speed – FPM (m/s) 1,924 (9.9)
Rotor – RPM 0 to 160
Path Width – in. (cm) 91 (231)
Hydraulic Oil Capacity
7.0 gal. (26.5 liters) Less Filter Change 2
Add .5 gal. (1.9 liters) With Filter Change 2
Hydraulic Oil 1
AW MV ISO68
(10W-40 Hot Weather)
(10W-30 Cold Weather)
1. “AW” stands for anti-wear and “MV” stands for multi-viscosity. The 68 refers to the general viscosity range and is similar to 10W-30-motor oil. It is recommended that AW MV 68
hydraulic oil be used. If this type of hydraulic oil is not available then use 10W-30 engine oil (cold weather) or 10W-40 engine oil (hot weather).
2. Hydraulic Oil should be above the sight glass when cold.