Multiquip MVH120GH - Manual (Page 28)

PAGE 28 — MVH-120GH — OPERATION AND PARTS MANUAL — REV. #3 (10/24/07)
l
NAME PLATE AND DECALS
MVH-120GH — NAME PLATE AND DECALS
OPERATIONAL CAUTION
Prior to OPERATION:
Check engine oil and fuel level
if not enough, add to proper level
To START engine:
1. Warm up engine at low speed for 3
to 5 minutes.
2. Operate machine always at full speed
to avoid incorrect clutch engagement.
3. Use travel lever for forward and reverse
motion. Do not push or pull lever strongly.
To STOP engine:
Move stop switch to “OFF” position.
To LIFT machine by using lifting hook in center
To STORE machine covered with plastic
sheet in a moisture.
Do not move travel lever
if engine stops
NPA-743 J
NPA-333
V BELT RPF-3320
NPA-742 J
SHELL TELLUS OIL
46
NPA-748 J
SAE 10W-30
MOTOR OIL
NPA-195 J
MVH-120
NAMEPLATE
1
4
5
6
2
3
8
7
9