Multiquip P33/24 HHMR - Manual (Page 34)

34
E
36
M
35
S
37
ÖF
34
Maintenance:
9.11 Changing the engine oil
Remark:
Drain the engine oil only when the engine is warm. Change intervals for engine oil, see the Hatz 2G40 Manual
(Annex).
i Danger
Danger of scalding!
Risk of scalding when draining hot engine oil!
• Disconnect oil drainage hose „S“ and remove plug „M“ (Fig. 35).
• Collect the oil in a suitable container and
dispose of in an environmentally responsible manner.
• Oil fi lter change (Fig. 37)
• Connect the oil drain hose and top up with new oil at the fi lling
hole „E“ (Fig. 36).
9.12 Hydraulic oil change
i Danger
Danger of scalding!
Risk of scalding when draining hot hydraulic oil!
9.12.1 Hydraulic system
Maintenance work on the hydraulic system is essentially limited to the fi lter and hydraulic oil tank. All
other units require no maintenance. The hydraulic line network should, however, be checked at regular
intervals for leaks. Do not spray hydraulic lines with paint.