Multiquip P33/24 HHMR - Manual (Page 31)

31
30
29
E
31
Maintenance:
9.04 Check engine oil level
Remark:
Park the machine on an even, load-bearing surface in such a way that it is horizontal.
• Pull out the oil dip stick „MS“ and wipe off with a lint-free cloth (Fig. 29).
• Insert the oil dip stick as far as it will go and pull out again.
• The oil level must be between the two marks.
• If the oil level is below the bottom mark, top up with oil immediately.
For suitable oil types, see the Hatz 2G40 manual!
9.05 Checking the hydraulic oil level
Remark:
Park the machine on an even, load-bearing surface in such a way that it is horizontal.
• Check the hydraulic oil level at the oil sight glass under the engine hood.
• Only check the oil level when the engine is cold. The hydraulic oil should come up to the middle of the sight glass.
• If necessary, top up with hydraulic oil.
Recommended oil types: Mobil HPL 46, Texaco Rando HD-C. Equivalent oil types from
other manufacturers can be used.
Remark:
If it is discovered during the daily oil level check that there is hydraulic oil missing, Check all units, pipelines and
houses immediately for leaks.
9.06 Checking the fuel level
i Danger
Danger of fi re!
When working with the fuel system, no naked fl ames,
no smoking. Do not refuel in enclosed areas. Do not breathe in fuel fumes.
Note:
Contaminated fuel can lead to the failure of or damage to the engine.
If necessary, top up fuel through a sieve fi lter.
Clean the area surrounding the fi lling hole and refuel.
Fuel: See the Hatz 2G40 operating manual!
(Annex)