Multiquip MRH800GS - Manual (Page 8)

PAGE 8 — MQ-MIKASA MRH800GS ROLLER — OPERATION AND PARTS MANUAL — REV. #5 (05/27/08)
MRH800GS — RULES FOR SAFE OPERATION
■ ALWAYS refuel in a well-ventilated area, away from sparks
and open flames.
■ ALWAYS use extreme caution when working with flammable
liquids. When refueling, stop the engine and allow it to cool.
DO NOT smoke around or near the machine. Fire or
explosion could result from fuel vapors, or if fuel is spilled on
a hot engine.
■ NEVER operate the vibration roller in
an explosive atmosphere or near
combustible materials. An explosion or
fire could result causing severe
bodily
harm or even death.
■ Topping-off to filler port is dangerous, as it tends to spill fuel.
■ ALWAYS store the vibration roller in a clean, dry location out
of the reach of children.
■ NEVER run engine without air cleaner. Severe engine
damage may occur.
■ NEVER leave the vibration roller unattended, turn off engine.
■ CAUTION must always be observed while servicing this
vibration roller. Rotating parts can cause injury if contacted.
■ DO NOT leave vibration roller with engine running. Use
chock blocks if parking vibration roller on a grade.
■ NEVER touch the hot exhaust manifold,
muffler or cylinder. Allow these parts to
cool before servicing engine or vibration
roller.
■ The engine of this vibration
roller requires an adequate
free flow of cooling air.
NEVER operate the
vibration roller in any
enclosed or narrow area
where free flow of the air is
restricted. If the air flow is
restricted it will cause
serious damage to the vibration roller or engine and may
cause injury to people and property. Remember the vibration
roller's engine gives off DEADLY gases.
■ High Temperatures – Allow the engine to cool before adding
fuel or performing service and maintenance functions. Contact
with
hot components can cause serious burns.
CAUTION:
Failure to follow instructions in this manual
may lead to serious injury or even death! This
equipment is to be operated by trained and
qualified personnel only! This equipment is
for industrial use only.
The following safety guidelines should always be used when
operating the MIKASA MRH800GS Vibration Roller:
GENERAL SAFETY
■ DO NOT operate or service this equipment before
reading this entire manual.
■ This equipment should not be operated by
persons under 18 years of age.
■ NEVER operate this equipment without proper
protective clothing, shatterproof glasses, steel-
toed boots and other protective devices required
by the job. ALWAYS wear slip resistant safety
shoes or boots.
■ NEVER operate this equipment when not feeling
well due to fatigue, illness or taking medicine.
■ NEVER operate this equipment under the
influence or drugs or alcohol.
■ NEVER use accessories or attachments, which are not
recommended by Multiquip for this equipment. Damage to
the equipment and/or injury to user may result.
■ Manufacturer does not assume responsibility for any accident
due to equipment modifications.
■ Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
■ ALWAYS wear proper respiratory (mask), hearing and eye
protection equipment when operating the vibration roller.