Mrh800gs — operation – Multiquip MRH800GS User Manual

Page 25

MQ-MIKASA MRH800GS ROLLER — OPERATION AND PARTS MANUAL — REV. #5 (05/27/08) — PAGE 25

MRH800GS — OPERATION

Recoil Start

On the control handle:

A. Move the

throttle lever

to the RUN position.

B. Move the

travel lever

to the NEUTRAL position.

C. Move the

vibration lever

to the OFF position.

Place the engine

fuel valve lever

(Figure 18) to the "ON"

position.

Figure 18. Engine Fuel Valve Lever (ON Position)

3. Place the

choke lever

(Figure 19) in the "

OPEN

" position

if starting a

cold

engine.

4. Place the

choke lever

(Figure 20) in the "

CLOSED

" position

if starting a

warm engine

or the

temperature is warm.

Figure 19. Engine Choke Lever (Open)

Figure 20. Engine Choke Lever (Closed)

7. If the engine has started, slowly return the choke lever

(Figure 22 ) to the

CLOSED

position. If the engine has not

started repeat steps 1 through 6.

8. Before the roller is placed into operation, run the engine for

several minutes. Check for fuel leaks, and noises that would
be associated with a loose component.

Figure 22. Choke Lever (Closed)

6. Grasp the starter grip (Figure 21) and slowly pull it out. The

resistance becomes the hardest at a certain position, corre-
sponding to the compression point. Pull the starter grip
briskly and smoothly for starting.

Figure 12. Starter Grip