BT Diverse 2000 - Manual (Page 20)

18
PROTECTED
This setting stops you accidentally
operating the handset’s keypad when
carrying it around. You can still receive
incoming calls but cannot make
outgoing calls.
• To switch to PROTECTED when the
handset is ON, press the
PWR
button
briefly. Display shows
KEYPAD LOCKED.
• To switch back ON, press the
PWR
button again briefly.
Making and receiving
external calls
To make an external call
Ensure the handset is switched ON.
• Press the
PHONE
button. You hear the
dial tone and the ‘In Use’ light on the
base station comes on and the display
shows
EXTERN.
• Enter the telephone number.
The phone calls the number and the
display shows the number you have
dialled.
Alternatively, you can dial the phone
number you want first, check that it’s
correct and then press the
PHONE
button
to dial.
PWR
If the handset is beyond radio distance
of the base station, the display shows
base station name f lashing. You can
also set the handset to ‘beep’ when out
of range (see page 29).
If you make a mistake entering numbers,
use the
symbol to delete them.
➜