BT Diverse 2000 - Manual (Page 13)

11
If the symbol flashes
continuously, it means the handset is
either out of range or is not registered
with the base station. To register, follow
the steps on page 12. All additional
handsets you purchase will need to be
individually registered with the base
station before they will work.
The symbol may also f lash after a
power failure. Provided the handset
has been registered with the base, the
symbol will stop f lashing after a
while indicating the handset has
automatically re-registered to the base
station. If it continues to f lash,
re-register the handset to the base
station – see page 12.
Please note: If you go out of range of
a base station for a long time while your
handset is switched ON, it may take
more than 20 minutes to ‘find’ the base
station again when you come back
within range. However, by simply
switching the handset OFF for a
moment, then ON again, it will find the
base station within a few seconds.
Getting the most out of your
batteries
Avoid replacing the handset on the base
station between calls. It is best to keep
the handset off the base for a few hours
at a time.