MTS SWIFT 45 GLP Sensor - Manual (Page 98)

DESCRIPTION
THE INFORMATION AND DESIGN(S)
DISCLOSED HEREIN ARE CONFIDENTIAL
AND THE PROPERTY OF MTS SYSTEMS
CORPORATION AND MAY NOT BE USED,
REPRODUCED OR DISCLOSED IN ANY
FORM EXCEPT AS GRANTED IN WRITING
BY MTS SYSTEMS CORPORATION. THIS
RESTRICTION EXCLUDES INFORMATION
THAT IS IN THE PUBLIC DOMAIN OR
WAS LEGITIMATELY IN THE PRIOR
POSSESSION OF THE RECIPIENT.
PROPRIETARY DATA
SOURCE/REF
DRAWING
MATERIAL DESCRIPTION
MATERIAL SIZE
FINISH MASK
M
THREAD DEPTHS ARE TO MIN FULL THDS
DRILL DEPTHS ARE TO FULL DIA
REMOVE BURRS AND SHARP EDGES
DO NOT SCALE PRINT
SCALE
MACHINED
SURFACES
180
UNLESS OTHERWISE SPECIFIED
.XXX HOLE SIZE TOLERANCE
0.000
TO .750
+.010/-.002
OVER .750
TO 1.500
+.015/-.003
2 ANGLE
G
E
N
E
R
A
L
T
OL
E
R
A
N
C
E
S
X
Y
.X
.XX
.XXX
THIRD
ANGLE
PROJ
C
MTS SYSTEMS CORPORATION
1/4
EDEN PRAIRIE, MINNESOTA U.S.A.
.1
.03
.010
DRAWN CHECK ENGR
DATE
MFG
DATE DATE DATE
SIZE
TITLE
NEXT LEVEL
PRODUCT CODE
NUMBER
SHEET OF
REV
D
REVISIONS
DATE ENGR DRAWN L
E
T
T
E
R
E
C
N
N
O
m
2
700-004-853
CUST/USER, SWIFT 45
-
RLJ - - BAO
6-1-09 - 6-09 -
1 2
-
-
-----
-----
-----
NONE
-
EXT ASSY-REFERENCE,
A
TOP ADAPTER PLATE
& INTERNAL M12 X 1.75MM
SCREW W/FLAT WASHER (8)
M12 X 1.75MM SOCKET HEAD
STANDOFF W/EXTERNAL
THREADED ENDS (4)
CONNECTOR EXTENSION LEG (4)
SWIFT 45 TRANSDUCER
ASSEMBLY NOTES:
ATTACH STANDOFFS TO SWIFT 45 TRANSDUCER. APPLY MOLYKOTE GN PASTE TO
M12 X 1.75MM THREADED STUD AND USING A 27MM SOCKET, TORQUE STANDOFF
TO 69 FT-LB (93 N-M).
ATTACH CONNECTOR EXTENSION LEGS TO TOP PLATE. ALIGN EACH LEG, SO THAT
THE KEYWAYS ARE ORIENTED AS SHOWN ON SHEET 2.
APPLY MOLYKOTE GN PASTE AND TORQUE M5 X .8MM SOCKET HEAD CAPSCREWS
TO 58 IN-LB (6.5 N-M).
ATTACH TOP PLATE TO STANDOFFS, WHILE ALSO PROPERLY ENGAGING CONNECTORS
TO THEIR RESPECTIVE MATING CONNECTOR ON SWIFT TRANSDUCER.
APPLY MOLYKOTE GN PASTE AND TORQUE M12 X 1.75MM SOCKET HEAD CAPSCREWS
TO 69 FT-LB (93 N-M).
ATTACH SLIP RING ASSEMBLY TO EXTENSION ASSY, USING M5 X .8MM SOCKET HEAD
CAPSCREWS, AT THE LOCATIONS SHOWN ON SHEET 2.
1
2
3
4
5
6
1
5
M5 X .8MM SOCKET HEAD CAPSCREWS (8) 3
4
2 4