MotorGuide Saltwater - Manual (Page 23)

MOUNT INSTALLATION
eng
19
1. Select an appropriate area on the deck of the boat to install the
mount. Ensure the forward mounting screws will not penetrate the
hull.
41280
Mount on deck with a 7.6 cm (3 in.) clearance
2. Using a Phillips head screwdriver and the decket screws provided
in the hardware bag, secure the decket to the mount base. (The
decket for heavy duty spring mounts can be installed last.)
3. Use the bow mount base as a template to mark the location of the
front mounting holes in the plastic decket and the rear mounting
holes on the mount base.
38097
4. Drill the mounting holes with a 6.5 mm (0.25 in.) diameter drill bit.
Remove any debris.