MK Diamond MK-1280 Gas - Manual (Page 9)

9
The MK-1280 Gas Saw is designed for use with a 16-inch diameter segmented wet or dry MK Dia-
mond blade with a .110 to .375 inch cutting width.
The MK-1280 Gas Saw can cut a variety of masonry types including, cinder block, slump stone block,
wall brick, paver brick, concrete block and cylinders, roofing tile, marble, granite, decorative rock or
almost any other non-ferrous material.
NOTE: The MK-1280 Gas Saw is not designed to cut plastic or metals.
Engine power ratings are calculated by the individual engine manufacturer and the rating method may
vary among engine manufacturers. Users are advised to consult the engine manufacturer’s owners
manual and website for specific information regarding engine power rating and maintenance.
PRODUCT SPECIFICATIONS
Operated and used according to this manual, the MK-1280 Gas Saws will provide years of depend-
able service.
The MK-1280 Gas Saw is engineered as portable brick saw powered by a Honda engine. The saw is
capable of cutting masonry up to five and three-fourths (5-3/4) inches (127mm) in height, and thirteen
and half (13.5) inches (343mm) in length in a single pass.
Motor specifications for the MK-1280 Series Saw are listed below.
Motor/Engine Honda
Power GX240
Blade Capacity 16” (406mm)
Depth of Cut 5.75” (146mm)
Length of Cut 13.5” (2” Thick Brick)
L x W x H (inches)
L x W x H (mm)
48.5” x 20.5” x 28”
1,232 x 521 x 711
Weight 200 lbs (91 kg)
GENERAL DESCRIPTION
SPECIFICATIONS
BLADE CAPACITY
MASONRY TYPES
MK-1280 GAS SAW PRODUCT SPECIFICATIONS
MOTOR SPECIFICATIONS