MK Diamond MK-1280 Gas - Manual (Page 18)

18
MK-1280 GAS SAW INSPECTION
Proper Oil Level
Low Level
Upper Limit
The pre-start inspection should be performed before beginning any job.
If the Diamond Blade shows signs of fatigue cracking, replace the blade before
starting work.
Fig. C
Verify Movable Cutting Table
moves freely
Fig. B
Inspect Wooden Strip for
excessive grooves
Fig. A
Inspect Blade for damage –
Verify Blade correct for mate-
rial being cut
Fig F
Check for proper oil level
(See Engine Manual if low)
Fig. E
Inspect MK-1280 Gas Saw for
general damage, loose connec-
tions and hardware
Fig. D
Inspect Engine for leaks
Fig. H
Check Air Filter for cleanliness
(See Engine Manual)
Fig. G
Check for proper fuel level
(See Engine Manual if low)
PRE-START INSPECTION
CAUTION
Fill Throat