MK Diamond MK-1280 Gas - Manual (Page 30)

30
MK-1280 GAS SAW TROUBLESHOOTING
Fig. A
Verify the engine is running.
If not, restart (See Setup,
Startup, Adjustment, Opera-
tion and Shudown)
Fig. B
Check Micro-V Belt (See Micro-V
Belt Inspection, Adjustment and
Replacement)
BLADE STOPS TURNING
Proper Oil Level
Low level
Fill Throat
Upper Limit
The Honda Engine is equipped with an oil level sensor that will stop the engine on a low
oil level
ENGINE STOPS
NOTES:
Fig. A
Pull Starter Cord straight
back in a smooth fast motion
Fig. B
Verify fuel level is below the
throat of the Fuel Tank
Fig. C
Check ffor proper oil level (SEe
Maintenance section if low)
Fig. D
Clean and readjust engine Spark
Plug (See Spark Plug Adjustment
and Replacement)
Refer to Engine Manual