MK Diamond MK-1280 Gas - Manual (Page 23)

23
MK-1280 GAS SAW MAINTENANCE
Fig. D
Clean Air Filter.
Refer to Engine Manual
Fig. E
Clean engine throttle link-
age with a dry cloth. Refer
to Engine Manual
Perform the following after initial purchase and operation of the MK-1280 Gas Saw.
INITIAL MAINTENANCE
Fig. A
Change engine oil after first
month or first 20 operating
hours. Refer to Engine Manual
Fig. B
Check and adjust V-belt ten-
sion following first 48 hours
of operation. See Micro
V-belt Inspection
To extend the life of the MK-1280 Gas Saw, the following procedure should be performed after each
use. Lubricate all points listed below with light oil such as, 3 in 1, WD-40, etc.
MAINTENANCE FOLLOWING USE
Fig. A
Lubricate the Movable Cutting
Table Roller Wheels
Fig. B
Lubricate engine throttle link-
age Points and Adjustment
Bar. Refer to Engine Manual