MK Diamond MK-1280 Gas - Manual (Page 29)

29
Turn the ON/OFF switch to the OFF position and place the Fuel Valve in the
CLOSED position before performing the following.
BLADE WILL NOT CUT PROPERLY
WARNING
MOVABLE CUTTING TABLE DOES NOT MOVE CORRECTLY
Fig. A
Check for Smoothness or
“Glazing”
Fig. B
Check for Proper Rotation
Fig. C
Ensure Blade Core is not bent
Fig. D
Verify blade is correct for mate-
rial being used
Fig. A
Check that the Guide Rails
are clean. Clean if dirty
Fig. B
Check the Movable Cutting
Table Roller Wheels and
replace if necessary
MK-1280 GAS SAW TROUBLESHOOTING