MK Diamond MK-EZ Profile Milling Machine - Manual (Page 20)

20
1. To prevent the possibility of electrical shock, the MK-EZ Profiler MUST
be de-energized when connecting the Water Pump.
2. To prevent the possibility of electrical shock, use only MK Diamond
authorized replacement parts.
To prevent pump damage, the Water Pump must be disconnected if cutting dry.
CONNECTING THE WATER PUMP
WARNING
MK-EZ PROFILER SETUP
NOTE:
(D)
The tool is now adjusted to make
the maximum profile that the tool
will make. Fine adjustments can
be made to the profile by using the
vertical and horizontal adjustment
knobs (loosening and retightening
their appropriate fixing screws).
PROFILE ADJUSTMENT
(A)
Adjust the cutting head vertical
position for the thickness of
the material. Adjustment is
made by loosening the two
slide bolts.
(B)
Using the fine vertical
adjustment knob.
(C)
Move the head up or down until
the material to be profiled just
touches the underside of the
profile tool upper guide. Retighten
the slide bolts.