MK Diamond MK-EZ Profile Milling Machine - Manual (Page 16)

12.2013
MK-EZ PROFILER OWNER'S MANUAL, PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com
Caution: Read all safety and operating instructions before using this equipment. This owners manual MUST accompany the equipment at all times.
Revision 100
Manual Part No. 170565-OM
16
UNPACKING
Use proper lifting techniques when lifting the MK-EZ Profiler
Remove the MK-EZ Profiler and accessory box from the carton.
CONTENTS
MK-EZ Profiler Pan,
Frame & Table Assembly
Electric Water
Pump
1" & 11/16" Open
End Wrench
Pump
Manual
Warranty
Card
Owner's
Manual
MK-400BDB Cutting Head
One (1) MK-EZ Profiler Pan, Frame and
Table Assembly,
One (1) Cutting Head Assembly
One (1) MK-400BDB 3/8 Radius Profiling Tool
One (1) Electric Water Pump
CAUTION
MK-EZ PROFILER UNPACKING
TRANSPORT
The MK-EZ Profiler is designed with a rigid, lightweight frame making the profiler easily
transportable. To lift the profiler, grasp the left and right of the pan at the lift points shown below.
Lift Point
Lift Point
1. The MK-EZ Profiler weighs approximately twenty-three (23) pounds; use care when transporting.
2. Never transport the MK-EZ Profiler with water in the Water Pan.
CAUTION
One (1) 1" Open End Wrench
One (1) 11/16" Open End Wrench
One (1) Owner's Manual
One (1) Pump Manual
One (1) Warranty Card