beautypg.com

Meade Instruments TE923W-M User Manual

Page 26

background image

26

Accessing Clock and Alarm Mode

Press main unit UP or DOWN until the clock icon

next to the time/date display continues

to flash.

From the handheld remote control: Press

.

Setting the time, date and language
• In the Clock and Alarm Mode, press and hold SET button until the day of week language

abbreviation “ENG” will flash.

• Press UP or DOWN selecting the day of the week in English, German, French, Italian, Spanish

or Dutch

• Press SET to confirm selection.
• Select the City Code for your area by pressing UP or DOWN. Refer to P.36 for a list of

available codes.

• Press SET to confirm the city selection and if your selected USR for city. This overrides the

automatic latitude and longitude pre programmed for each city. You will be prompted to enter
the latitude, longitude, Time Zone and select the Daylight Savings Time on or off. (Go to P.36
for programming detail.)

• Press UP or DOWN to adjust the latitude. Press and hold either button for quick digits advance.
• Press SET to confirm the selection.
• Continue setting the longitude using the same technique.
• Set the Time Zone by pressing UP or DOWN to adjust the time in 30 min intervals. Press and

hold either button for quick digits advance.

• Press SET to confirm selection.
If the USR was selected as a city code or your city is located in the Daylight Savings zone you
would need to set the Daylight Saving Time Option:
• Press UP or DOWN to enable or disable the DST option. Press and hold either button for quick

digits advance.

• Press SET to confirm selection.
• Continue setting the year, month, day, calendar format (day/month or month/day), time format

(12 or 24 hours), local hour and minutes, using the same technique.

After programming is completed, the display will return to the default Clock and Alarm Mode.
Note: Press and hold SET anytime during the setup to return to normal Clock and Alarm Mode
and all previous settings will be cancelled.

Clock and Calendar Displays
Briefly press the SET button to alternate between the 5 Clock & Calendar displays:
• Time with the Day of the week
• Time for UTC (Coordinated Universal Time)
• Time with the City abbreviation
• Time with the Seconds
• Month/ Day/ Year or Day/ Month/ Year.

TE923W IM1(ENG) HONEYWELL R.pmd

4/11/08, 5:28 PM

26