Meade Instruments TE923W-M User Manual

Page 25

FULL

LAST

NEW

FIRST

Understanding the Moon Phase Diagram

UV Mode

The current UV intensity is indicated by the numerical value and more intuitive display, by

categorizing it into the levels “LOW”, “MED”, HIGH”, V. HIGH” and EXTREME. It is also

represented by a comfort icon that corresponds to different levels.

The main unit records the daily and weekly maximum UV intensity. Values may be displayed in

MED/h or UVI.

Accessing UV Mode
From the main unit: Press UP or DOWN until the UV icon

on the display will flash. From

the handheld remote control: Press

Viewing UV Statistics

In UV Mode press the MEMORY button viewing either current UV intensity, daily Maximum UV

intensity with “DAILY MAX” displayed or weekly Maximum UV intensity with a “WEEKLY

MAX” displayed.
Resetting the UV Statistics Memory

In UV Mode, press and hold MEMORY to reset all UV statistics.
Setting Units for UV Display (MED/h or UVI)

In UV Mode, press and hold SET to convert units between MED/h and UVI.

Clock and Alarm Mode
Manual Settings

The main unit can be manually set to display the time, calendar or UTC time. There are three time

alarms available on the main unit:

Weekday alarm (W), Single alarm (S) and Ice Warning Alarm

(Pre-Al).

• If Weekday alarm is activated, it will sound at the set time and the alarm icon will flash

Mondays through Fridays.

• If Single day alarm is activated, it will sound at the set time and the alarm icon will flash only

for this specific day and will not activate on subsequent days.

• The Ice Warning Alarm is

activated at programmed time interval (from 15 to 90 minutes)

before the weekday or single alarm, if channel 1 temperature falls to freezing and below.

Note: The snooze duration for listed alarms can also be programmed up to 15 minutes.

)

(