Meade Instruments TE923W-M User Manual
Page 16
16
To set the pressure & altitude units and program your altitude, use the handheld remote control or
main unit control panel:
Buttons and Controls
Most of the handheld remote control buttons are corresponding to the main unit controls.
To expose the main unit control buttons, press the OPEN button on the upper right corner of the
main unit and the controls’ cover door will open.
Main unit and handheld remote control adequate buttons
A.
UP
B.
DOWN
C.
SET
D.
MEMORY
E.
HISTORY
F.
ALARM/
CHART
G.
CHANNEL
H.
LIGHT/
SNOOZE
- Selects the next available mode anti-clockwise
Increases parameters
-
-
Selects the next available mode clockwise
- Decreases parameters
- Rotates display for current mode
- If depressed and hold, enters into the programming mode or changes
parameter’s units
- Confirms set parameters
- Allows displaying the moon phase, UV, temperature, humidity, rainfall
and wind memory records
- Allows displaying the sea-level pressure history
- Allows displaying the time alarms and alerts for the temperature, rainfall
and wind.
- If depressed and hold, allows entering into the alarm/alert
programming mode
- When depressed and hold in pressure and forecast mode, allows viewing
of the different bar charts
- Changes the temperature and humidity channel- Enables the temperature
and humidity channel auto-scan mode
- Enables a backlight for 5 seconds- Snoozes the alarms
A
B
C
D
E
F
G
H
I
M
P
6
2
:
5
,
8
0
/
1
1
/
4
d
m
p
.
R
L
L
E
W
Y
E
N
O
H
)
G
N
E
(
1
M
I
W
3
2
9
E
T
16