Marshalltown SW100H Shockwave Vibratory Screed - Manual (Page 13)

13 of 48
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.marshalltown.com
WS570
R10-22-12
HOW TO OPERATE
FUEL AND OIL
Make sure gas tank has plenty of 86 octane or
higher gasoline . Your 4 stroke Honda engine uses
straight gasoline, NEVER USE A GAS/OIL MIX .
Empty entire bottle of provided Honda engine oil
into crank case . 3 .5 oz . is the maximum oil
capacity . Always lay screed down on roll cage as
shown when filling gas and oil or checking oil .
NEVER OVERFILL .
STARTING
1 . On a cold engine, move choke lever to CLOSED
position . To restart a warm engine leave choke in
OPEN position
2 . Press priming bulb repeatedly until fuel can be
seen in the clear-plastic fuel-return tube
3 . Press On/Off Switch to the On Position .
4 . Pull the starter grip lightly until you feel resistance,
then pull briskly . Repeat until engine starts .
5 . If the choke lever was moved to the CLOSED
position to start the engine, gradually move it to
the OPEN position as the engine warms up .
RESTARTING A WARM ENGINE
1 . Leave the choke lever in the OPEN position .
2 . If there is no fuel in the clear-plastic fuel-return
tube, press priming bulb repeatedly
until fuel can be seen in the tube .
3 . Press On/Off Switch to the On Position
4 . Pull the starter grip lightly until you feel resistance,
then pull briskly . Repeat until engine starts .
CLOSED
OPEN
1
2
3
4