MAMAC Systems IP-PC-101-44-VDC - Manual (Page 9)

SECTION 2 - Internet Protocol
Figure 6
192 . 168 . 1 . XX
. . .
255 . 255 . 255 . 0
X ? Internet Protocol (TCP/IP) Properties
X ? Local Area Connection Properties
X ? Local Area Connection Status
Insure that the laptop/PC network settings are set up correctly. From the
Start menu, go to Settings,
click
Network Connections. Double click the Local Area Connection icon. Local Area Connection
Status screen will open. Click on the
Properties tab. Local Area Connection properties page will open.
Scroll down to
Internet Protocol (TCP/IP) and click/highlight. Now click on the Properties tab on
the same screen. Internet Protocol (TCP/IP) Properties page will open. Click the
Use the following
IP address: radio button. Now punch in a static IP address with the same subnet as the appliance as
shown in fig. 6. Example: 192.168.1.XX. The XX can be any number except 10 because the Maverick
default IP is 192.168.1.10. We recommend using 192.168.1.11. Now click on the second line
Subnet mask. It should automatically fill in with 255.255.255.0. If it does not please input the subnet
as shown below. Default Gateway and DNS setup is not required for initial setup. Fields can be left
blank. Click
OK . Now OK or Close out of the Network Connections.
If Windows wants to restart the laptop/PC after the network configuration, please do so. Laptop/PC is
configured to do initial configuration of the appliance. Launch the Internet Explorer or Firefox web
browser. Delete everything in the address box and punch in the default IP 192.168.1.10. Press enter.
The Maverick will connect and the
Password/Clock page will be served up by the appliance to force
the user to change the password.
2.1.0
© Copyright 2008 DN IS-IPPC101.1 ® Registered trademark MAMAC SYSTEMS, Inc.
8 of 20