Loadstar Sensors DI-100U Digital Load Cell Interface Manual - Manual (Page 19)

DI-100 User's Guide
Page: 19 / 19
P/N : 033-02205-Rev2
6 DI-100 T
ECHNICAL SPECIFICATIONS
Performance
Resolution 16-Bit A/D
Update Speed Approx. 7.5 sample per second
Rated Input Up to 3mV/V (3mv per volt)
Environment
Operating Temperature -10 to 55C (15 to 131F)
Storage Temperature -20 to 85C (-5 to 185F)
Humidity 5 to 85% RH Non Condensing
Voltage Powered by USB port
Power 5Vdc @ 30mA
Vibration Not to exceed 4 mm displacement at 16.7 Hz, for > 60 minutes
Shock Not greater than a 20 cm drop onto a hard wooden surface
Enclosure
Construction Material ABS Plastic
Dimensions Approx. 4.20”(L) x 1.62”(W) x 0.90”(H)
Maximum Remote Load Cell Cable Length
Cable Length 10 feet, 20 AWG wire
Special Interfaces
PC Interface USB 2.0
Device Manager Interface Virtual COM Port