Lenze EMF2177IB - Manual (Page 8)

PC system bus adapter 2173 / 2177
L
6 PC system bus adapter EN 1.1
Windows XP
When the system bus adapter is plugged into a free USB port the Hardware update wizard will be
automatically displayed.
• Open the dialog box Hardware update wizard, go to ”Automatic software installation” and press
the button Next to install the software for the system bus adapter.
The driver for PC system bus adapter 2177 has now been installed.
Note!
If the Hardware update wizard does not automatically find the required driver, indicate the below
directory:
[Drive] :\Programs\Lenze\Drivers
Enter the letter of the hard disk drive selected for the installation of the Lenze tool as ”[Drive]”.
4.2 Installation of the system bus configuration tool
The Lenze system bus configuration tool for a convenient configuration of the system bus adapters
is installed together with the driver for PC system bus adapter 2177.
Note!
If PC system bus adapter 2173 is used with older versions of the Lenze tools the system bus
configuration tool might not yet be available on your PC.
In this case, a separate driver update has to be installed which can be found at the Lenze homepage
in the Internet:
http://www.Lenze.de W Downloads W Update versions
Please proceed as follows:
1. Download the driver update from the Lenze homepage to your local hard disk.
(File ”UPDATE_CAN_DRIVER.EXE”)
2. Install the Lenze tools you want to communicate via the system bus adapter.
3. Select the file ”UPDATE_CAN_DRIVER.EXE” to install the driver update.
4. Follow the instructions of the installation program.
Show/Hide Bookmarks