Lenze EPM-H521 - Manual (Page 66)

Electrical installation
Memory card mounting
Memory card 8 MB (backup)
4
66 EDBPM-H521 DE/EN/FR 2.0
Mounting memory card 8 MB (backup)
0
1
2
h521_011
Fig.4-4 Mount memory card 8 MB (backup)
1. Insert the distance pins into the bores of the main board and press until
they click into place.
2. Insert the memory card into the socket connector with the male
connector and carefully press to fix them.
3. Align the bores of the memory card and the distance pins .
4. Press the memory card onto the distance pins until they click into place.
Close housing cover
INPUT VOLTAGE: 18-32 VDC 15 W
FUSE 1.25 A
MSP
LPT
N.C. CAN+ Shield CAN- V-
1 2 3 4 5
24VDC
+ -
1 2 3 4
1 2 3 4
N.C.
0 0
h521_010
Fig.4-5 Close housing cover
1. Replace the housing cover and tighten screws .