Lenze ECSxK series - Manual (Page 20)

Mechanical installation
Thermally separated mounting (”push-through technique”)
4

20 EDBCSXKXXX EN 1.0
Dimensions of mounting cutout
³
60
mm
³
90
mm
a1 a1
b1 b1
1 2 0
c1
h
d
c1
g
g
ECSXK063
Fig.4-3 Dimensions of mounting cutout for thermally separated mounting, ECSDKxxx type
 Mounting plate
 Mounting cutout for ECSDK001
 Mounting cutout for ECSDK002
Capacitor modules Dimensions [mm]
Type Size A1 b1 c1 D g h
ECSDK001 1 78.5
197 75 250 M5 10 5
ECSDK002 2 121.5
197 75 250 M5 10.5
Mounting

Stop!
When boring through the rear panel of the control cabinet:
Seal the fixing screws with a liquid thread seal to ensure the protection
class IP54 for the separated heatsink.
For mounting the capacitor module ECSDKxxx proceed as follows:
1. Prepare fixing holes for the clips (see drawing).
2. Prepare mounting cutout.
3. Fix the clips.
4. Push the capacitor module into the mounting cutout.
5. Let the capacitor module snap into place at the top and bottom.
Show/Hide Bookmarks