Lenze MCH Series Drives - Manual (Page 15)

RG-MHLON 12
LonWorks Network Variables
4 MCH LonWorks® Network Variables
The MCH LonWorks® Network Variables (nv) are divided into three types: input, output and configuration.
Sections 4.2 - 4.5 describe each of these variable types and the individual supported variables within each.
4.1 LonWorks® Network Variable Map
Figure 3 is a visual map of the supported LonWorks® network variables for the MCH Series drive.
Variable Speed Motor Drive: 6010
Mandatory
Network
Variables
Optional
Network
Variables
Manufacturer-Defined
Network
Variables
Manufacturer-Defined Configuration Properties
ncMFR1 - nciStopMode (UCPT)
ncMFR2 - nciStopLevel (UCPT)
ncMFR3 - nciPIDGain (UCPT) (Not supported)
ncMFR4 - nciPIDIntTime (UCPT) (Not supported)
ncMFR5 - nciPidDerTime (UCPT) (Not supported)
ncMFR6 - nciParValue (UCPT)
ncMFR7 - nciParRead (UCPT)
ncMFR8 - nciParWrite (UCPT)
Configuration Properties
nc17 - nciLocation
nc50 - nciMaxSpeed (mandatory)
nc53 - nciMinSpeed (mandatory)
nc48 - nciRcvHrtBt
nc49 - nciSndHrtBt (mandatory)
nc52 - nciMinOutTm
nc158 - nciNmlSpeed (mandatory)
nc159 - nciNmlFreq (mandatory)
nc160 - nciRampUpTm (mandatory)
nc161 - nciRampDownTm (mandatory)
nc162 - nciDrvSpeedScale
nvoDrvSpeed
SNVT_lev_percent nv4
nvoDrvCurnt
SNVT_amp nv3
nvoDrvVolt
SNVT_volt nv5
nvoDrvPwr (Not supported)
SNVT_power_kilo nv6
nvoDrvRunHours
SNVT_time_hour nv7
nviDrvSpeedStpt
SNVT_switch
nv2
nv1
nviDrvSpeedScale
SNVT_lev_percent
nviResetFault
SNVT_switch nv8
nviEmergOverride
SNVT_hvac_emerg nv9
nviDigOutput1 (Not supported)
SNVT_switch nv10
nviDigOutput2 (Not supported)
SNVT_switch nv11
nviAnlgOutput (Not supported)
SNVT_lev_percent nv12
nvoSpeedActRpm
SNVT_count_inc nv12
nvoTorqueAct (Not supported)
SNVT lev percent nv12
nvoDrvTemp (Not supported)
SNVT_temp_p nv12
nvoFreqAct
SNVT_freq_hz nv12
nvoDrvStatus
SNVT_count nv12
nvoRunning
SNVT_switch nv12
nvoFaulted
SNVT_switch nv12
nvoPIDAct (Not supported)
SNVT_lev_percent nv12
nvoEmergOvrStat
SNVT_hvac_emerg nv12
nvoDigInput1 (Not supported)
SNVT_switch nv12
nvoDigInput2 (Not supported)
SNVT_switch nv12
nvoAnlgInput (Not supported)
SNVT_lev_percent nv12
nvoParValue
SNVT_count nv12
Figure 3: LonWorks® Network Variable Map for MCH Series Drives