Lenze E94APNE - Manual (Page 30)

Safety instructions
General safety and application notes for Lenze power supply modules
2
l
30 EDK94PNE36 DE/EN/FR/ES/IT 3.1
2 Safety instructions
2.1 General safety and application notes for Lenze power supply modules
(According to: Low−Voltage Directive 2006/95/EC)
General
Lenze power supply modules can include live and rotating parts ˘ depending on their type
of protection ˘ during operation. Surfaces can be hot.
Non−authorised removal of the required cover, inappropriate use, incorrect installation or
operation, create the risk of severe injury to persons or damage to material assets.
More information can be obtained from the documentation.
All operations concerning transport, installation, and commissioning as well as
maintenance must be carried out by qualified, skilled personnel (IEC 364/CENELEC HD 384
or DIN VDE 0100 and IEC report 664 or DIN VDE 0110 and national regulations for the
prevention of accidents must be observed).
According to this basic safety information qualified, skilled personnel are persons who are
familiar with the assembly, installation, commissioning, and operation of the product and
who have the qualifications necessary for their occupation.
Application as directed
Power supply modules are components which are designed for installation in electrical
systems or machinery. They are not to be used as domestic appliances, but only for
industrial purposes according to EN 61000−3−2. The documentation contains information
about compliance with the limit values according to EN 61000−3−2.
When installing the power supply modules into machines, commissioning (i.e. starting of
operation as directed) is prohibited until it is proven that the machine corresponds to the
regulations of the EC Directive 98/37/EC (Machinery Directive); EN 60204 must be
observed.
Commissioning (i.e. starting of operation as directed) is only allowed when there is
compliance with the EMC Directive (2004/108/EC).
The power supply modules meet the requirements of the Low−Voltage Directive
2006/95/EC. The harmonised standards of the EN 61800−5−1 series apply to the power
supply modules.
The technical data and information on connection conditions can be obtained from the
nameplate and the documentation. They must be strictly observed.
Warning: The power supply modules are products which are intended for use in an
industrial environment according to EN 61800−3. Operation on public mains supplies
requires additional measures to be taken for limiting the expected radio interference.
Transport and storage
Please observe the notes on transport, storage and appropriate handling.
Observe the climatic conditions according to the technical data.