Leica Biosystems EG F - Manual (Page 15)

15 Leica EGF
4.2 Instrument components/functions
The control panel on the front side of the control unit consists of a mem-
brane keypad with push buttons (2), a single-line display (1) and an LED (3)
which flashes yellow during the warm-up phase. If the preselected oper-
ating temperature is reached, this indicator lights permanently, thereby
signaling its readiness.
Temperature display
Two options are available for selecting the temperature display:
• Temperature in °C
• Temperature in °F
Changing the temperature unit
• Switch off mains switch of the control unit.
• Switch on the control unit while holding the
key pressed.
Changing the temperature
• Change the temperature value by pressing the
or key.
4. Instrument Characteristics
2
1
3
Important!
The forceps holder will become hot. Risk of burning!