Labnet Z206A High Capacity, Compact Research Centrifuge - Manual (Page 6)

Page 6 of 24 INSTRUCTION MANUAL Z 206 A © HERMLE Labortechnik GmbH
1 PRODUCT DESCRIPTION
1.2.1.3 Installation
Follow these steps:
• Check whether power supply corresponds with the one named on the manufacturer's rating label
which is mounted on the rear panel.
• The line voltage circuit breaker is max. 10 A (type K) slow release for commonly used instruments.
• In case of emergency, there must be an emergency switch off installed outside the room in order to
disconnect the power supply of the unit.
(• Remove the transport spacer blocks from the motor shaft (see chapter 2.2.2).)
The outlet for the power cord must be easy to reach and to disconnect!
1.3 Technical Data
Manufacturer HERMLE Labortechnik GmbH
Type / Model Z 206 A
Dimensions
Width
Depth
Height
28 cm
37 cm
26 cm
Weight 15 kg
Noise level (max.) 60 +2.0 dB (A)
Max. speed
Max. volume
Max. RCF
Admissible density
Admissible kinetic energy
6000 rpm
6 x 50 ml
4185 x g
1.2 kg/dm 3
1694 Nm
Electrical connection AC
Current
Connected load
230 V / 50 Hz 1 ph
0.55 A
100 Watt
120 V / 60 Hz 1 ph
1.1 A
100 Watt
Interference suppression VDE 0871, Funkentstörgrad B
Test obligations
To be filled in by purchaser:
Inventory-No.:
Check-No.:
Location:
Maintenance contract:
Your service department Labnet International
PO Box 841, Woodbridge, NJ
Ph: 732-417-0700
Your agent