Klein Tools 56206 User Manual
Page 3
3
5.
Keeping the conduit flat, apply ample foot pressure to the bender’s heel minimizing the use of
the handle as a lever, rolling up the free end into the 90° position checking the degree with a
level. When done properly the free end will be at the desired height and the arrow will be at
the stub height as indicated.
In some installations there will be a need to cut down the
unbent side of the conduit to another desired length to fit
the installation. Use a tube cutter for smooth precise
cutting and burr removal to ensure the safety of the
electrical wiring when pulled through. A hacksaw can be
substituted as long as the tubing’s cut edge is prepared
properly.
Klein Tools Tube Cutter:
#88975 & 88977
Klein Tools Hacksaw:
#701-10, 701 -12 &701 -S
Klein Tools Level:
#931-6RE & 931-7RE