Klein Tools 56206 - Manual (Page 10)

10
4. Using the Distance off Center Mark values found in the table to clear a 2” obstacle, simply mark
that distance from the center line in both directions or subtract this number from the center
mark value for the first return bend mark and add that number to the center mark value to
obtain the second return bend mark distance.
(Center Mark) – (Distance off Center Mark) = 1 st Return Bend Mark
Example: (20-3/8”) – 5” = 15-3/8”
(Center Mark) + (Distance off Center Mark) = 2 nd Return Bend Mark
Example: (20-3/8”) + 5” = 25-3/8”
5. Mark the conduit accordingly.
6. Place the bender on the conduit and
position the appropriate Center of
Bend Rim Notch on the center mark in
the orientation shown.
30° 45° 60°