Klein Tools Harnesses - Manual (Page 19)

Klein permanently attaches highly durable warning
and instruction tags and/or labels to its harnesses. In
the event any of these tags and/or labels become
unattached, lost, or damaged, contact the Klein Tools Sales Department, toll-free at 1-800-553-4676 for
information on how to have the tags and/or labels
replaced free of charge.
■ For use by properly trained professionals only.
■ For personal use only. NOT for towing or hoisting.
■ NOT for recreational or sporting use.
■ Harnesses must be properly sized and adjusted to fit
user. Always wear harness snug to avoid injury.
■ Only use locking snap hooks.
■ OPE equipment must only be used for the specific pur-
pose for which it is designed and intended.
■ OPE equipment must be destroyed if subjected to impact
loading.
■ Always visually check that: 1) each snap hook freely
engages the intended D-ring or anchorage, and 2) the
snap-hook keeper (latch) is completely closed with
each use. Have a co-worker visually check to make
sure that the locking snap hook attached to the fall-
arrest D-ring (centered in the back of the harness) is
properly secured. Never rely solely on feel or sound in
attempting to determine that a snap hook is engaged.
■ Always visually check that all buckles and connectors are
properly closed before each use.
B2 1
592
Read
Other
Side
Read
Next
Tag
W
ARNINGS
W
ARNINGS
■ Before each use check that: 1) OPE equipment is
free of burns, cuts, abrasions, broken strands or
stitches, kinks, knots or excessive wear, 2) rivets are not
bent, loose or missing, 3) buckles, D-rings and other
hardware are not distorted or cracked, 4) buckle tongue
does not bind on buckle and buckle holes are not dam-
aged, and 5) hook keepers are free of burrs, functioning prop-
erly, clean and not bent. If the OPE equipment does not
pass the inspection, it should be removed from service
immediately and destroyed or re-inspected by a compe-
tent person as defined by OSHA to determine its usability.
■ Assume the responsibility for determining that your
OPE harness and equipment are in excellent condition
at all times.
■ Whenever there is a risk of a fall, personal fall-arrest
protection must be used. Therefore, when working at
an elevated position, always attach the fall-arrest D-
ring in the back of the harness to an approved fall-arrest
anchorage with a suitable fall-arrest lanyard or other con-
necting device. Where not possible, use alternative fall-arrest
protection.
■ Never punch additional holes or alter any OPE equipment
in any way.
B2 2
592
Read
Other
Side
Read
Next
Tag
W
ARNINGS
W
ARNINGS
W
ARNINGS
■ Never attach ladder or rebar hooks onto a D-ring.
■ Never attach multiple snap hooks onto a D-ring.
■ Never attach anything to a D-ring other than a sin-
gle, locking snap hook. The existence of another
object attached to a D-ring may prevent or falsely indi-
cate snap-hook engagement.
■ Store your OPE equipment in a clean, dry area such as
a tool chest or storage room.
■ Employer – Before allowing the use of this equipment,
instruct your employees as to its proper use and alert them
to these warnings.
■ Read, understand and follow all instructions, cau-
tions and warnings attached to and/or packed with this
and all occupational protective equipment before
each use.
■ Klein strongly recommends that Klein components
NOT be interchanged with other components made
by other manufacturers because Klein cannot guarantee that
other manufacturers’ components are free of defects in mate-
rials or workmanship.
B2 3.
592
Read
Other
Side
Read
Next
Tag
W
ARNINGS
■ AVERTISSEMENT: Ne pas réutiliser un harnais
ayant déjà interrompu la chute d’un utilisateur.
■ AVERTISSEMENT: Ajuster la sangle pec-
torale à mi-hauteur de la poitrine.
■ AVERTISSEMENT: Au cours d’une opération de
sauvetage, le ou les cordages ne devraient étre fixés
qu’à l’anneau simple monté à l’arrière ou aux deux
anneaux coulissants en forme de D montés sur les
épaules.
■ WARNING: Any unit harness which has seen
fall arresting service should not be used after such
service.
■ WARNING: The chest strap should be positioned at
the mid-chest level.
■ WARNING: During a rescue, the line or lines should
be attached only to the single-mounted back D-ring and/or
to both shoulder- mounted sliding D-rings.
CSA B2 1.
693
Read
Other
Side
Read
Next
Tag
HOMOLOGU
É
CSA
CSA
CERTIFIED
HARNAIS DE SÉCURITÉ
Z259.10 ANSI Z359.1
FULL-BODY HARNESS
Z259.1 ANSI Z359.1
KLEIN TOOLS INC., CHICAGO, IL USA LM91642
KLEIN TOOLS INC., CHICAGO, IL USA LM91642
General Tags for Harnesses
87012, 87020, 87021, 87022, 87023, 87044, 87074,
87075, 87076, 87080, 87081, 87082, 87090, 87091,
87092, 87093, 87810, 87811, 87812, 87813, 87814,
87820, 87821, 87822, 87823, 87824, 87829, 87830,
87831, 87832, 87840, 87841, 87842, 87850, 87851,
87852, 87853, 87854, 87890, 87891, 87892, 87893,
87962, 87963, 87964, 87965
Klein Harness Warning Tags
(continued)
19