Klein Tools Lanyard with Wire Pigtail Connector User Manual
Instructions for the proper use and care of klein, Lanyard with wire pigtail connector, Adv ert en cia

These
These instructions
instructions explain
xplain ho
how to use, inspect,
inspect, and
and
maintain the Klein Lanyard with Wire Pigtail.
NOTE: For clarity, illustrations in this instruction booklet do
not show any warning tags or labels, which are attached to
each product. Warning information for Klein connecting
devices is printed on durable labels and/or tags attached to
the device.
Klein manufactures a full line of occupational protective
equipment (OPE). Each is a part of an OPE system for fall-
arrest, positioning, suspension, retrieval, or combination
application.
To assemble an OPE system, follow the A-B-C Rule. All
personal OPE systems include three major components:
(A) anchorage, (B) body wear (such as a harness), and
(C) connecting device. Klein’s Lanyard with Wire Pigtail is
used as a connecting device (the “C” component) in the
system. The wire pigtail connects to the anchorage (the “A”
component) and the lanyard-end locking snap-hook connects
to the fall-arrest OPE harness (the “B” component).
Klein’s Lanyard with Wire Pigtail is designed to add an
attachment point to an aerial boom, I-beam, or similar
structural member to make a compatible fall-arrest
anchorage. It offers the strength and abrasion resistance of a
wire aircraft cable connector with the convenience of a
permanently attached fall-arrest lanyard – all combined in
one piece of equipment. Snap-hooks with 11/16” (17mm)
throat openings are attached to both ends of the lanyard.
A typical use for a Klein Lanyard with Wire Pigtail is shown in
Figure 1. This connecting device provides a rugged and
versatile anchorage attachment for many hostile work
environments. The steel cable pigtail has a vinyl coating
which makes it perfect for anchorage connections on all types
of steel structures and transmission towers.
When using any OPE system, you must be sure the entire
system meets OSHA regulations. Be sure the primary
anchorage is identified and evaluated by a competent
person, as defined by OSHA, at the job site. A competent
person must also determine that the type of OPE connecting
device and harness are appropriate for the job.
Be sure to read, understand, and follow all instructions and
warnings attached to and/or packed with all other tools,
devices, and equipment you are using.
The Lanyard with Wire Pigtail is designed to meet OSHA
criteria for fall arrest. The fall-arrest function can be
recognized by the Klein identifying symbol shown below.
the Klein identifying symbol shown belo
the Klein identifying symbol shown belo This
symbol is also printed on Klein warning tags and labels and
in the Klein OPE catalog.
Instructions for the Proper Use and Care of
Klein
®
Lanyard with Wire Pigtail Connector
For Fall-Arrest Use Only
Introduction
Figure
Figure 1
Save these instructions. Klein
anchorage connecters must NOT be used by anyone
who has not read, understood, and followed all the
warnings, instructions, and inspection procedures
contained in this booklet. Failure to observe these
warnings, instructions, and procedures could lead to
serious injury or death. Training
T
T
and instruction
review should be repeated at regular intervals by the
user and his or her employer.
(A) Anchorage
(B) Body Wear
(C) Lanyard with
Wire Pigtail (used with
Deceleration Unit)
Par
a p
rof
esi
ona
les
...
des
de
185
7
®
ADV
ERT
EN
CIA
Una
c
aíd
a
pod
ría
c
aus
ar
les
ion
es
gra
ves
o
la
mue
rte
.
No
util
ice
es
te
dis
pos
itiv
o a
m
eno
s q
ue
hay
a re
cib
ido
ca
pac
ita
ció
n a
dec
uad
a.
Lea
y
s
iga
to
das
la
s i
nst
ruc
cio
nes
y
adv
ert
enc
ias
.
!
Document Outline
- Instructions for the Proper Use and Care of Klein® Lanyard with Wire Pigtail Connector
- Introduction
- Al Always Use Fall all Pr Protection otection if There Is a Risk of a Fall all
- Construction of Klein’ Klein’s Lan Lanyard rd with Wire Pigtai Pigtail
- Physical Properties of Materials
- General Inspection Pr Procedures ocedures
- Pigtail Lan Lanyard rd Inspection nspection Pr Procedures ocedures
- Ho How to Use Klein’ Klein’s Pigtail Lan Lanyard rd
- Maintenance Pr Procedures ocedures
- Klein Lan Lanyard rd with Wire Pigtail Warning arning W Ta Tag
- Instrucciones para el uso y cuidado apropiado del acollador con conector de cable flexible de conexión Klein®
- Introducción
- Use siempre protección otección contra caídas si existe iste riesgo de caída
- Construcción del acollador con cable fle flexible xible de conexión xión Klein
- Propiedades físicas de los materiales
- Pr Procedimientos ocedimientos generales de inspección
- Pr Procedimientos ocedimientos de inspección del acollador con cable fle flexible xible de conexión
- Cómo utilizar el acollador con cable fle flexible xible de conexi xión Klein
- Pr Procedimientos ocedimientos de mantenimient mantenimiento
- Etiqueta de ad advertencia tencia del acollador con cable fle flexible xible de conexión xión Klein