BenQ PB9200 - Manual (Page 32)

Multifunctional Settings 26
INPUT Menu
With the INPUT menu, the items shown in the table below
can be performed. Perform each operation in accordance with
the instructions in the table below.
(This table is continued to the following page.)
Item Description
COLOR SPACE
Select a color space mode using the 5 / 6 buttons. :
AUTO RGB SMPTE240 REC709 REC601
Selecting the AUTO automatically selects the optimum mode.
memo This item can be selected only at a RGB signal or a compo-
nent video signal other than a COMPONENT port input of 525i/
625i/SCART RGB.
memo The AUTO operation may not work well at some signals. In
such a case, select the SMPTE240 or the REC709 for a HDTV signal.
COMPONENT
Select a function of COMPONENT port using the 5 / 6 buttons. :
COMPONENT SCART RGB
When the SCART RGB is selected, the COMPONENT port function
as a port for a SCART RGB signal input. Please refer to the section
Connecting Your Devices.
VIDEO
Select a signal type mode using the v buttons. :
AUTO NTSC PAL SECAM NTSC4.43 M-
PAL N-PAL
Selecting the AUTO automatically selects the optimum mode.
memo This item is performs only at a video signal from the VIDEO
port or the SVIDEO port. For a component video signal, the signal
type is identified automatically independently of this function.
memo The AUTO operation may not work well at some signals. If
the picture becomes unstable (ex. a irregular picture, a color lack),
please select the mode depending on the input signal.
3D-YCS
Select the TURN ON or the TURN OFF using the 5 / 6 buttons. :
TURN ON TURN OFF
When the TURN ON is selected, the 3D-YCS mode works for a com-
pletely still image, or images with few motions.
memo This item performs only at a video signal of NTSC3.58.
memo When this function performs, the setting of the item VIDEO
NR of this INPUT menu is not effective.
VIDEO NR
Select a noise reduction level using the 5 / 6 buttons. :
HIGH MIDDLE LOW
The noise on screen is reduced according to the selected level.
memo This item performs only at a video signal from the VIDEO
port or the SVIDEO port. At a video signal of NTSC3.58, this func-
tion performs only when the TURN OFF is selected to the item 3D-
YSC of this INPUT menu.
memo When this adjustment is excessive, certain degradation may
appear on the picture.
: SELECT
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK COLOR SPACE
COMPONENT
VIDEO
3D-YCS
VIDEO NR
P. INP. INPUT
P. INP. POSIT.
POWERUP INPUT AUTO
COMPONENT
AUTO
TURN OFF
LOW
VIDEO
RGB
PB9200-e.book Page 26 Thursday, May 27, 2004 2:15 PM