BenQ PB9200 - Manual (Page 18)

Remote Control 12
Operating The Remote Control
CAUTION
• Do not disassemble the remote control.
• Do not place the remote control near the projector’s lens, fan, or vents.
• Do not drop or otherwise expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects on it. Doing so may result
in malfunction.
• Remove the batteries from the remote control and store them in a safe place if you
won't be using the remote control for an extended period.
NOTE
• Replace the batteries whenever the remote control starts to malfunction.
• When strong light, such as direct sunlight or light from an extremely close range (such
as from an inverter fluorescent lamp), hits the projector's remote sensor, the remote
control may cease to function. Adjust the direction of the projector to keep light from
directly hitting the projector's remote sensor.
• The remote control works
with the projector’s remote
sensor.
• Front remote sensor is 3
meters with a 60 degree range
(30 degrees to the left and
right of a remote sensor). Rear
remote sensor is 3 meters with
a 40 degree range (20 degrees
to the left and right of a
remote sensor).
• Also a remote signal reflected in the screen etc. may be available. If it is difficult to send
a remote signal to the sensor directly, please try.
• Since the remote control uses infrared light to send signals to the projector (Class1
LED), be sure to use the remote control in an area free from obstacles that could block
the remote control’s output signal to the projector.
memo You can use the remote control as a wired remote control, by connecting the
REMOTE CONTROL ports of the main unit and remote control via an audio cable (3.5 dia.
stereo mini cable with plugs).
INTER INPUT M1-D RGB BN G S-V IDEO STANDBY/ON TEMP VID EO CO MPONENT
LAMP
KEYST ONE SEARCH RESET MENU FOCUS LENS SHIF T ZOO M
INTER INPUT M1-D RGB BNG S-VIDEO STANDBY/ON TEMP VIDEO COMPONENT
LAMP
KEYSTONE SEARCH RESET MENU FOCUS LENS SHIFT ZOOM
VIDEO R-AUDIO IN-L S-VIDEO BNC
RGB
AUDIO IN1 AUDIO IN2 RGB OUT AUDIO OUT
REMOTE CONTROL
R/CR/PR G/Y B/CB/PB H V Y
CONTROL NETWORK
CR/PR Ca/Pa
approximately
3 meters
approximately
3 meters
20
d
eg
re
es
30
d
eg
re
es
30
de
gr
ee
s
20
d
eg
re
es
PB9200-e.book Page 12 Thursday, May 27, 2004 2:15 PM