BT BF900 User Manual

Page 17

Using the BF900

If you make a mistake when dialling, press the <
button to move the cursor back to the digit you want
to change. The selected digit f lashes. Enter the new
digit. Press the > button to move the cursor forward.
Alternatively, delete all the digits shown in the
display by pressing the CLEAR/TONE button.

On-hook dialling

You can use hook dialling to monitor the
progress of the call via the loudspeaker.

• Load the document.
• Press the

HOOK

button. You hear the dial

tone.

• Enter the fax number you want. The number

is dialled. Display shows the number and

PRESS START

• Press the

START

button when you hear the

fax tones from the other machine.

Dialling fax numbers from an attached

phone

You can use an attached telephone to send a
document direct from the document feeder.

• Load the document.
• Pick up the telephone handset and dial the

fax number you want.

• When you hear the fax tones, press the

START

button.

HOOK

START

• Replace the handset. Your document starts

to go through. Display flashes

MANUAL TX

and the fax number called.

Redialling the last number

• Load the document.
• Press the

REDIAL

button. Display shows

PRESS START

• Press the

START

button. The document is

scanned into memory and the number is
dialled.

One-touch dialling

You can store up to 32 numbers in the
one-touch directory. (See page 22 for how to
store one-touch numbers.)

• Load the document.
• Set the

TYPE ORG

RESOLUTION

and

PHOTO

settings if necessary.

• Press the

ONE-TOUCH

button you want.

Display shows the number stored.
For example, press once to display the
number stored under 05, or press twice to
display the number stored under 37.

• The document is scanned and the number is

dialled automatically.

START

PAUSE\
REDIAL

Please note
The telephone must be connected to the line adaptor
socket on the BF900 line cord.